The 1/4 inch Right Guide Foot also gives a perfect 1/4 inch topstitch distance from the edge of a block when stitching the locks, batting and backing together.

Piecing:
1. Snap on the 1/4 inch Right Guide Foot.
2. Engage the IDT™ system.
3. Select a straight stitch.
4. Place the fabric right sides together
under the presser foot with the guide at
the edge of the fabric.
5. Sew the blocks together, guiding the
edges so that it touches the right guide.

Topstitching:
1. Snap on the 1/4 inch Right Guide Foot.
2. Engage the IDT™ system.
3. Select a straight stitch, triple straight stitch or the
hand-look straight stitch quilting stitch.
4. Place the quilt under the presser foot with the
flange guide in the seam ditch or at the edge of
the fabric block.
5. Sew around the block and you will get a perfect
1/4 inch distance from every block edge.

Note: With any of the 1/4 inch Right Guide feet for IDT™ system attached to machines with
manual presser foot lift we recommend not to lift the presser foot to the extra high position.
This can cause the needle holder to touch the guide on the presser feet.
With the needle set to down position we recommend just to lift the presser foot as much as
needed for pivoting so that the fabric can be turned freely.